Page last updated Oct 20, 2021 @ 10:04pm

CABSET912

cset-apc1a.jpg (19915 bytes)  cset-apc1b.jpg (23012 bytes)   cset-apc1c.jpg (31518 bytes)  cset-apc1d.jpg (35420 bytes)   cset-apc1e.jpg (44400 bytes)
unassemble    assembled     parallel conn.   series conn.        in box      

click on thumbnail image above to enlarge

 

Universal Battery Cable Set
for use with APS912 Inverter/Charger UPS System

Universal battery cable set designed for APS inverter/charger when you buy your own batteries.  We have eliminated the trouble and uncertainty of selecting and finding the right gauge wire, proper lugs, and correct type and size of dc fuse recommended in the owners manual for these inverters.  To reduce the chance for wiring mistakes the cables are insulated red for positive and black for negative.

The cable gauge is over-sized to minimize dc voltage drop which is critical if you want maximum efficiency and the ability to take advantage of the inverter's surge power rating.  The cables come with ring-tongue terminals already installed to fit batteries with stud or L shaped flag terminals.  If your batteries only have automotive style posts this cable set also works with optional adapters (wing nut post lugs).  If you require these request them in the comments at the bottom of the checkout screen and we will include them for an additional $10.  A fuse holder and properly rated fuse is also included.

Cables are also long enough to make the connections if your batteries are installed in a protective box such as shown in the image above.  If you use a box, make sure it is NOT air tight.  Hydrogen gas can be generated if batteries are inadvertently overcharged.  Use of some sort of protection is strongly recommended over your batteries since there is a danger of sparks, injury and fire if any metal object falls across the terminals of batteries.  Be sure to follow all the battery manufacturer's safety precautions.

This set consists of enough cables to connect up to two batteries in parallel or series to your inverter/charger.  Cable size is #2 ga minimum and is extra flexible.  Fuse is rated for 250 amps dc.  Note also that insulation is pre-stripped on the cables that connect to the inverter dc input connections.

 

 


Item Number: CABSET912
Price: $89
Price last updated 09/08/17
Shipping Weight: 4 lbs.
This item normally ships in approximately 1 week or less.

 

Are YOU ready for the next power outage?

 1 Videos
 2 Outage Archives
 3 Utility Industry
 4 Why You Need Backup
 5 Personal Stories
 6 NoOutage Configurations
 7 Safety
 8 Sizing for Your Needs
 9 Voltage Drop Calculator
10 Test Reports
11 Placing Order
12 Equipment Leasing
13 Books & Videos  
14 Financing
15 Frequently Asked
16 Future Technologies
17 Electricity Glossary
18 Help with Plug Types
19 Who We Are
20 Why Buy Here
21 Our Customers
22 Pick a Contractor
23 Privacy Promise
24 Safe Shopping Guarantee
25 Terms & Conditions
26 What's New
27 Contacting Us
28 Parts Lookup
29 Parts & Service
30 Made in USA
31 Links

We welcome your feedback or questions.  Click here to contact us.
See our Terms & Conditions before using information or ordering from this web site.
Copyright © 1999-2023 NoOutage.com LLC.  All rights reserved.