Page last updated Jul 11, 2011 @ 08:38pm

LPG01

Lpg01-bs.jpg (44821 bytes)
typical components included sample installation instructions
lick on thumbnail image above to enlarge

Conversion Kit
gasoline to LPG & natural gas, up to 11hp

This add-on kit enables the gasoline engine that drives your portable generator to also accept liquefied petroleum gas (LPG) and natural gas.  This converts your generator set from a single fueled unit to a tri-fueled device.  Perfect if you are concerned about having enough fuel on hand, or being able to purchase fuel during prolonged power outages.

Kit consists of pressure regulator for your propane tank, 4 feet of connecting hose, and a special adapter designed to fit your particular engine.  Also comes with general instructions so you or your local gas man can install.  When connected to a natural gas or piped supply, the pressure regulator is not normally used but you will need to add a manual shutoff valve.  Due to the lower energy content of natural gas, your generator maximum capacity must be derated about 20% when using natural gas.  But no derating is necessary when LPG is used.

After kit is installed, to switch from gasoline to LPG all you do is close the gasoline tank outlet valve and run the engine until all the fuel is consumed from the line and carburetor.  Then open the LPG valve and restart the engine.  Some engine manufacturers may say that installing any modifications on an engine will void their warranty.  However, this add-on kit does not really modify the engine, and can be completely removed if necessary.

Kit conforms to the National Fire Protection Association (NFPA) Pamphlet 58 requirements for use of gaseous fuels as a motor fuel outdoors.  This kit should be used only for portable generators operated outdoors.  If the converted engine is to be housed in an enclosure or used indoors, additional equipment is required to positively shut off the fuel supply if the engine should fail while unattended.

When ordering, be sure to specify in the comments section at the bottom of the checkout screen the exact make and model number of your ENGINE.   This is necessary to ensure you get the proper adapter.  Adaptors are available for Briggs & Stratton, Tecumseh, Honda, and other engines.  Pricing shown is for most kits.  In the unlikely event the kit for your particular engine costs more than this, we will notify you and give you the choice of canceling your order at no charge or agreeing to the additional cost.   If you never plan on using a portable propane tank and will only connect to a fixed piped fuel supply (already at low pressure) you can delete the tank regulator.  Click here for sample installation and operating instructions.

 




Item Number: LPG01
Price: $324
Shipping Weight: 6 lbs.
This item normally ships in approximately 3 days or less.

If you will be using natural gas or a piped propane system you will not need us to provide the tank pressure regulator.  If you want to supply the fuel from a small portable propane tank then you WILL need a tank pressure regulator (if you don't already have one).  Select the proper option above.
 

Are YOU ready for the next power outage?

 1 Video Introduction
 2 Outage Archives
 3 Utility Industry
 4 Why You Need Backup
 5 Personal Stories
 6 NoOutage Configurations
 7 Safety
 8 Sizing for Your Needs
 9 Voltage Drop Calculator
10 Test Reports
11 Placing Order
12 Equipment Leasing
13 Books & Videos  
14 Financing
15 Frequently Asked
16 Future Technologies
17 Electricity Glossary
18 Help with Plug Types
19 Who We Are
20 Why Buy Here
21 Our Customers
22 Pick a Contractor
23 Privacy Promise
24 Safe Shopping Guarantee
25 Terms & Conditions
26 What's New
27 Contacting Us
28 Parts Lookup
29 Parts & Service
30 Made in USA
31 Links

We welcome your feedback or questions.  Click here to contact us.
See our Terms & Conditions before using information or ordering from this web site.
Copyright 1999-2016 NoOutage.com LLC.  All rights reserved.