Page last updated

Metering

Metering
These are ac and dc meters perfect for displaying the performance of
your electrical system.

table-arrow.gif (695 bytes)

Description

Ratings

Price
$ US

NGV25
NGV25-SW
POWERmeter 6 Wattmeter - deluxe optional switching, 6 function digital display, Volts, Amps, Hertz, kW, pf, hours, prewired in 3-gang box 220-240V single phase, 50/60Hz,
4kW to 350kW generators or
power company service to 1500A
---
NPZ022 POWERmeter 7 Wattmeter - 6 function digital display Volts, Amps, Hertz, kW, pf, Watt-hours plus alarm NEW 220-240V single phase, 50/60Hz,
0kW to 22kW generators
or
110-120V single phase, 50/60Hz
0kW-11kW generators
METERPNL4 Meter Panel Kit - 4 panel meters 2-1/2" rectangular, analog, 5% AC & DC starts at
MB75
MBR75
Watt Meter Box - Reliance Controls 2 meters, for generators up to 7.5kW 2 ammeters scaled for 3.75kW each
indoor & outdoor versions
MB125
MBR125
Watt Meter Box - Reliance Controls 2 meters, for generators up to 12.5kW 2 ammeters scaled for 6.25kW each
indoor & outdoor versions
discontinued
MB30
MB60
Watt Meter Box - Reliance Controls 2 meters, for generators up to 7.5kW or 15kW NEW 2 ammeters scaled for
3.75kW or 7.5kW each
indoor/outdoor plastic enclosure
NMB Watt Meter Kit - 1, 2 or 3 meters for standard wall-mount switch boxes 120V 1ph generators up to 7500W
120/240V 1ph generators up to 15000W
120/208V 3ph generators up to 22000W
850 Panel Meter - Shurite 2-1/2" rectangular, analog 5% AC & DC, voltage & current & frequency starts at
7230 Meter - 3750W, 30A 125V (see footnote) displays 3750W at 30A through current sensor
7231 Meter - 7500W, 60A 125V (see footnote) displays 7500W at 60A through current sensor
7222 Current Sensor - donut type, for above analog Wattmeters, 1000:1 0.35" diameter opening for wire
CR8450-1000 Current Sensor - donut type, 1000:1 0.515" diameter opening for wire
9016LFT Digital Voltage & Frequency Monitor - for temporary or continuous monitoring of utility or generator power 120VAC 60Hz
plugs into standard wall or generator outlet

Note: The 7230 and 7231 meters are intended for reading one hot leg of a 120/240V system which means two meters and two sensors are required.  However, if BOTH hot wires are passed through one sensor in opposite directions, one connected meter will see the sum of the two currents.

 

For detailed descriptions and buttons to add items to your shopping cart, click on item number in first column of tables above.   For detailed online ordering steps, click here.  We are continually adding new products and updating prices, so check back soon.