Page last updated

RMK Remote Metering Kit

THIS PRODUCT DISCONTINUED WHEN GENERAC ACQUIRED GEN/TRAN
SEE OUR OTHER METERING KITS HERE

Remote Watt Meter Kit
2 Watt Meters for 15kW Total
(not recommended for generators less than 10kW)

Don't operate your backup or alternative power electrical system blind!  Install this watt meter kit  so you can see what is happening.  Perfect for monitoring generator load when your transfer switch or panel does not have meters.

Remote Metering Kit for generators up to 15,000 watts. Helps you balance loads on your generator to prolong the life of your generator alternator. Can be installed in indoor flush-mount applications including Generator-Ready Load Centers. Each kit includes two wattmeters rated up to 7500 watts (each), "donut" type current transformers for fast, easy installation with virtually any transfer switch or load center.  Includes 7 hubs to accommodate almost any mounting location. Made with UL Listed components.

For maximum meter life we do not recommend direct mounting of enclosure on engine driven generators due to vibration.  Mount separately on an indoor wall.

Each donut sensor/current transformer has a 0.60" diameter opening to provide ample space for the generator wire.  Outside diameter of sensors is 1.17".  Secondary wire length is 18" but these can be extended using additional larger gauge wire for greater distances.

 

Specs and Ordering Table
(for other metering options including generator smaller than 10kW and larger than 15kW click here)

Model No. Mounting Configuration Price
$ US
Add to Shopping Cart
RMK-15-I indoor surface mount Discontinued
RMK-15-F indoor flush mount Discontinued
RMK-15-O outdoor $92 Discontinued