Page last updated
DISCONTINUED AND REPLACED
WITH THE 510 SERIES
|As Installed||As Shipped with LED meter||Showing removable breaker||Spec Literature|
click on thumbnail image above to enlarge
(switch shown with LED meter that is no longer available)
Manual Transfer Switch
50A, 12500W max, hardwired
Pro/Tran® by Reliance Controls
Latest technology in load-side transfer switches...
with built-in analog meter
high capacity 30A 2pole branch
This is the most advanced load-side transfer switch available at this time. This NEW Q-series Pro/Tran® switch from Reliance Controls has all the great features of the original plus some new capabilities...
* Analog meters for indicating the power on each hot leg of generator.
* Includes (1) 30 amp double pole branch circuit breaker - allows you to power
that 240Vac electric water heater or other large load.
* Designed for standard 1" plug-on interchangeable circuit breakers. Allows for
changing breaker sizes in the field using readily available breakers.
* All branch wiring (except for 30 amp circuit) sized for 20 amps so that any
15 amp breaker can be upsized to 20 amps in field.
Easy to install and operate, connects portable generator to residential load center. Allows manual transfer of individual loads to prevent overloading generator. Each individual circuit can be transferred separately and only as needed. Now required by Article 702.6 of the 2002 National Electric Code to prevent inadvertent backfeeding of electric power from generator into utility system which can be a safety hazard.
|Total Capacity||12,500 watts, 50 amps|
|Single Pole Circuits - 120VAC||(6) 15 amp|
|Double Pole Circuits - 240VAC||(1) 20 amp with handle tie
(1) 30 amp with handle tie
|Generator Connection||hard wire internally|
|Generator Load Watt Meters||Yes|
|Enclosure Type||indoor surface mounted|
|UL Short Circuit Withstand Rating||5,000 amps|
|Dimensions||12" W x 13" H x 4.6" D|
Electronic LED Meter (no
|Electrical Ratings (3 models)||12.5kW, 50 amps, 125/250Vac (EM1251)|
|Ambient Temperature Range||0C to 40C (32F to 104F)|
|Max Humidity||80% RH below 31C (88F)
50% RH above 31C (88F)
|Max Altitude||2000 meters (6,500 feet)|
|Transient Overvoltage Limits||category II|
Each circuit provided with non-defeatable (break-before-make) double throw switch protected with a resettable circuit breaker. Dual electronic watt meters provided for balancing generator load. The 1 x 18 inch flexible conduit is pre-wired for easy connection to existing residential load center panel. Installs in less than an hour, without pulling the electric meter or installing a sub-panel. Suitable only for circuits protected with up to 30 amp breakers or fuses. UL listed and CSA certified. Exclusive Pro/Tran® Reliance Controls 24 month warranty. Made in USA
Customers who purchased this product also ordered:
(click underlined words to see product pages)
Cordset for connecting generator PC5010,
PC5025 or PC5050
Cord plug modification for generators with straight blade receptacle MOD1450P
Inlet box PB50 or PR50
Replacement circuit breakers Q115, Q120, Q220
Flush mounting kit should be available for this product in May 2006