click on thumbnail
image above to enlarge
Page last updated
20216A
REPLACED WITH PRO/TRAN® 2 SERIES MODEL 206A
click on thumbnail
image above to enlarge
Manual Transfer Switch
Pro/Tran®
by Reliance Controls
Easy to install and operate, connects portable generator to residential load center. Allows manual transfer of individual loads to prevent overloading generator. Each individual circuit can be transferred separately and only as needed. Now required by Article 702.6 of the 2002 National Electric Code to prevent inadvertent backfeeding of electric power from generator into utility system which can be a safety hazard.
Specifications
| Total Capacity | 5000 watts, 20 amps |
| Single Pole Circuits - 120VAC | (4) 15 amp |
| Double Pole Circuits - 240VAC | (1) 20 amp with handle tie |
| Generator Connection | NEMA L1420P male inlet plug-in |
| Generator Load Watt Meters | Yes |
| Enclosure Type | indoor surface mounted |
| Convenience Receptacle | No |
| UL Listing | UL1008 |
| UL Short Circuit Withstand Rating | 5,000 amps |
Each circuit provided
with non-defeatable (break-before-make) double throw switch protected with a resettable
circuit breaker. Dual watt meters
provided for balancing generator load. The 3/4 x 18 inch flexible conduit is pre-wired for easy
connection to existing residential load center panel. Installs in less than an hour,
without pulling the electric meter or installing a sub-panel. Suitable only for
circuits protected with up to 20 amp breakers or fuses. UL listed and CSA
certified. Exclusive Pro/Tran®
Reliance Controls 24 month warranty.
Made in USA 
Customers who purchased this product also ordered:
(click underlined words to see product pages)
Cordset for connecting generator PC2010,
PC2025 or PC2050
Straight blade plug modification for generators without twist-lock receptacle MOD6-20P
Clear protective cover for switch CK06
