Page last updated

FLEXware

(FLEXware250, FLEXware500, FLEXware1000)

OutBack-FLEXware.jpg (30930 bytes)
click thumbnail image
above to enlarge

Integrated Switchgear
for installing OutBack inverters,
charge controllers, breakers
indoor enclosure

FLEXware 250

For applications with modest power requirements such as cabins, chalets, homes, remote communication sites and back-up power systems. The FLEXware 250 accommodates all of the essential protective devices in the smallest possible space at the lowest installed cost. Utilizing an extremely compact design and unique mounting features, one or two FLEXware 250 enclosures can be mounted on each end of a single FX Series Inverter/Charger. The FLEXware 250 enclosure is constructed of powder-coated aluminum and has been ETL listed. It provides breaker spaces for battery, PV array or PV GFP breakers and mounting locations for AC GFCI outlet, AC breakers and an Input-Output-Bypass Assembly. In keeping with the philosophy of FLEXware, the FLEXware 250's flexibility is evident in the generous number of knock-outs allowing the installation of conduit, cable glands, and other installation accessories.

FLEXware 500

For applications with medium power requirements such as homes, light commercial or larger back-up power systems. The FLEXware 500 system architecture can support up to two OutBack FX Series Inverter/Chargers, up to two OutBack charge controllers and all the associated AC and DC components. Thanks to a very compact design, FLEXware 500 AC and DC enclosures mount with a FLEXware MP in either a horizontal or vertical orientation to allow installation in more space-limited locations for a fast and professional looking wall-mounted installation. The FLEXware 500 accommodates all of the essential protective devices in two enclosures

FLEXware 1000

For applications with large power requirements such as large residential, commercial or village power systems. The FLEXware 1000 system architecture is capable of supporting up to four OutBack FX Series Inverter/Chargers, four OutBack charge controllers, and all the required AC and DC components and wiring. Utilizing a compact design, FLEXware 1000 AC and DC enclosures accommodate all of the essential protective devices with lots of room for additional breakers and large cable connections and can be mounted either vertically or horizontally.

 

Customers who purchased this product also ordered:
(click underlined words to see product pages)
MATE system controller
HUB communications hub
RTS remote temperature sensor for battery
FX or GFX inverters
X-240 auto transformer or FX-STACK stacking kit

Order FLEXware systems below by using the drop down menus to configure arrangement.  These do not include inverters, charge controllers, wire, or hub (which must be ordered separately).  If you have an off-grid installation with no intention of ever feeding the FLEXware system with ac (such as from a backup generator) the ac bypass is not required.

Assembly, wiring and programming time varies with experience but usually takes 1-3 days. 


FLEXware250

FLEXware500

FLEXware1000