click on thumbnail
image above to enlarge
Page last updated Oct 20, 2021 @ 10:03pm
KIT3026
SEE SIMILAR TRC AND XRC
SERIES PANELS
click on thumbnail
image above to enlarge
Manual Transfer Switch Panel Kit
30A maximum, 10 circuits max
6 circuits included, with inlet box and 10' cordset
This generator transfer switch Kit includes everything you'll need to safely feed generator power to a home or small business during an outage, and is compatible with virtually any portable generator up to 7500 continuous Watts. This kit includes a prewired 6-circuit transfer switch, a 10 foot power cord, a 30 amp non-metallic, raintight power inlet box, and an extra 20 amp plug (NEMA L14-20) to accommodate smaller generators up to 5000 Watts.
You can power up 6 to 10 essential circuits during a power outage or emergency like your furnace blower (gas or oil only), refrigerator and kitchen circuits, well pump, lights, and television. If your needs change, your installer can easily expand this transfer switch to up to 10 circuits just by adding more circuit breakers. The enclosure can be surface mounted indoors in a dry location like a basement, interior room or garage. Because it was designed with off-the-shelf circuit breakers, you don't have to search high and low for replacements, and your installer can reconfigure the breaker combinations to suit your family's needs.
This transfer switch comes with dual Wattmeters to help you balance generator loads evenly to prolong generator life. The switch includes the breakers listed in the table below. Mount the power inlet box on an exterior wall outside away from doors and windows so hazardous fumes don't enter your home.
Since this switch is installed like a sub-panel a 60-amp 2-pole main breaker is required in existing load center (not included). This switch accommodates Arc-Fault and GFCI breakers to meet the latest (2008) National Electric Code requirements. It also accommodates surge suppression breakers. The transfer switch is UL Listed with breakers from Siemens, Square D (HOM), Cutler-Hammer (BR), and GE (THQL).
UL 1008 Listed. Protected by US Patent 6,861,596 B2 and other patents pending. Transfer Switch dimensions: 9.25 W x 11.125 H x 3.375 D. Made in USA.
NOTE: Square D Arc Fault breakers will NOT fit in this panel. Other brands of Arc Fault breakers will fit fine.
Configuration
| Number of branch circuits provided | 8 |
| Maximum number of branch circuits (using 1/2 height breakers) |
10 |
| Empty circuit spaces (as provided from factory) |
0 |
| Maximum current at 240VAC | 30 amps |
| Maximum generator size | 7,500 watts |
| Branch breakers included | (2) 15 amp, 1 pole (2) 20 amp, 1 pole (1) 20 amp, 2 pole (0) 30 amp, 2 pole |
| Main breaker required in load center (not included) | 60 amp, 2 pole |
This product supersedes model numbers 2026K and 3028K.
Customers who purchased this product also ordered:
(click underlined words to see product pages)
Flush Mounting Plate 50329
This item no longer sold. See Announcement at top of page.
Are YOU ready for the next power outage?
We welcome your feedback or questions. Click here to contact us.
See our Terms & Conditions before using information or
ordering from this web site.
Copyright © 1999-2025 NoOutage.com LLC. A Virginia LLC. All rights reserved.
