Page last updated Oct 20, 2021 @ 10:11pm
click on thumbnail image above to enlarge
Manual Transfer Panel
For installations that require more capacity for heavier loads of 25 amps or more, such as electric water heaters, electric ranges, well pumps, motors, commercial refrigeration, heat pumps and central air conditioning. Suitable for use with larger generators. This panel may be sub-fed from the existing building panel, or may be used as service entrance equipment. Supplied with a double pole utility breaker and a double pole generator breaker that are interlocked to prevent both from being closed at the same time. This eliminates the danger of backfeeding to the utility, endangering utility repair crews. It also prevents utility power from feeding into your generator and causing damage. Allows manual transfer of individual loads to prevent overloading generator. The installer selects the the proper size branch breakers to add to this panel. Power inlet receptacle and generator meters all provided in panel.
Standard features include NEMA 1 indoor cabinet (NEMA 3R outdoor optional) suitable for surface or flush mounting and tin plated copper bus bars. Accommodates up to twelve 1 inch branch circuit breakers or as many as 20 combination 1/2 inch and 1 inch circuit breakers. This panel is UL Listed for use with any of the following circuit breakers:
- Siemens Type QP, QT, QPH, HQP, QPH, QPHF, QFP, QE, QEH
- Square D Series HOM (100 amp max)
- Westinghouse/Cutler Hammer Series BD, BR, BQ, GFC (100 amp max)
Provided with preinstalled generator breaker, main utility breaker and two meters for generator watts.
Assembled in USA![]()
Dimensions H x W x D (inches): 15-3/4 x 12-3/8 x 3-3/8
Specs and Ordering Table
Eligible discounts will be deducted by cart!
Prices last updated 4/30/2022
Shipping weights start at 25 lbs.
These items normally ship in approximately 2 weeks or less.
Model No. | Utility Branch Breaker Required in Load Center (by installer) | Max. Generator Input
(Amps) (Watts) |
Male Inlet Installed (click link) |
Works with: Cordsets Inlet Boxes |
Price $ US without branch breakers |
Add to Shopping Cart |
TRK0603C | 60A | 30A 7,500W |
none | PC3010M,
PC3020M, PC3025M or PC3040M PB30, PBN30 or PR30 |
$212 |
|
TRK1003C | 100A | 30A 7,500W |
none | PC3010M,
PC3020M, PC3025M or PC3040M PB30, PBN30 or PR30 |
$256 |
|
TRK1005C | 100A | 50A 12,500W |
none | PC5010,
PC5020, PC5025, PC5040
or PC5050 PB50, PB50N or PR50 |
$256 |
|
NOTES:
1. A branch breaker provided by the installer must be installed in the upstream load center to feed this sub-panel.
2. Additional models including outdoor versions available upon request.
Are YOU ready for the next power outage?
We welcome your feedback or questions. Click here to contact us.
See our Terms & Conditions before using information or
ordering from this web site.
Copyright © 1999-2023 NoOutage.com LLC. All rights reserved.