Page last updated Oct 20, 2021 @ 10:11pm
VAKPU
click thumbnail image
above to enlarge
Voltage Monitor Relay
208-240Vac single phase
adjustable voltage and delay settings
with socket
Voltage monitor relays provide protection to equipment where an over or under voltage condition is potentially damaging. This relay can be used as an under voltage or over voltage relay depending on the output contact used. Can switch the equipment directly if the current is within the contact rating. Otherwise it is used to control a switching contactor to power large electrical loads. Sold with 600V rated octal socket included. UL Listed.
Specs
COIL CONTACT RATINGS - single make/break Voltage Tolerance +50% to -40% of nominal 240Vac 50/60Hz 10A resistive Pickup voltage 85-115% of nominal 30Vdc 10A resistive Dropout voltage 80-95% of pickup 120/240Vac 1/2 hp Coil power less than 3VA Life Expectancy-mechanical 10,000,000 operations Reset automatic Life Expectancy-electrical 100,000 operations TIMING Operate & Release 0.1-10.0 sec adjustable INDICATOR LED TEMPERATURE Energized steady red Operating -28 to +65 C (-20 to +150 F) Off steady green Power up mode green flashing
.
Item Number: VAKPU-70169D
Price: $143
Price last updated 1/1/2014
Shipping Weight: 2 lbs.
This item normally ships in approximately 1 week or less.
Are YOU ready for the next power outage?
We welcome your feedback or questions. Click here to contact us.
See our Terms & Conditions before using information or
ordering from this web site.
Copyright © 1999-2023 NoOutage.com LLC. All rights reserved.