Page last updated

30216

THIS MODEL IS DISCONTINUED AND NO LONGER AVAILABLE.
For alternatives click the following:
30216A, 30216V.

Gt20216.gif (36768 bytes)
click on thumbnail
image above to enlarge

Manual Transfer Switch
surface mount

Easy to install and operate, connects portable generator to residential load center.  Allows manual transfer of individual loads to prevent overloading generator.   Each individual circuit can be transferred separately and only as needed.   Now required by Article 702.6 of the 2002 National Electric Code to prevent inadvertent backfeeding of electric power from generator into utility system which can be a safety hazard.

6 single-pole 120 volt circuits or 4 single-pole 120 volt circuits plus 1 double-pole 240 volt circuit, 15 amps maximum per circuit, 60 amps maximum combined load at 125 volts or 30 amps maximum combined load at 250 volts.  Each circuit provided with non-defeatable (break-before-make) double throw switch protected with a resettable circuit breaker.  Twist lock male L1430P power inlet receptacle for cable connection to generator, 7500 watt maximum.  Dual watt meters provided for balancing generator load with a convenience outlet that is "live" under generator power.  The 3/4 x 18 inch flexible conduit is pre-wired for easy connection to existing residential load center panel.  Installs in less than an hour, without pulling the electric meter or installing a sub-panel.  Suitable only for circuits protected with up to 20 amp breakers or fuses.  UL listed and CSA certified.  NEMA 1 indoor surface mount enclosure.  Exclusive Gen/Tran 24 month warranty.  See Gen/Tran Instruction Book.  Made in USA  

 

Specifications

Total Capacity 7500 watts, 30 amps
Single Pole Circuits - 120VAC (4) 15 amp
Double Pole Circuits - 240VAC (1) 15 amp with handle tie
Generator Connection NEMA L1430P male inlet plug-in
Generator Load Watt Meters Yes
Enclosure Type indoor surface mounted
Convenience Receptacle Yes
UL Listing UL98 (this product should be installed before the next NEC is issued in 2005)
UL Short Circuit Withstand Rating 1,000 amps

 

Customers who purchased this product also ordered:
(click underlined words to see product pages)

Cordset for connecting generator RJB10410 or RJB10425Y
Straight blade plug modification for generators without twist-lock receptacle MOD6-20P

Item Number: 30216
Your Price: 
Shipping Weight: 9 lbs.

Dimensions H x W x D (inches): 7-1/2 x 7 x 4-1/2